For the "California Room," or "Arizona Room" as some of us know them, they chose a Hybrid Flake blend called "Turquoise". We think this was a perfect choice for the color palette they have in this beautiful room.
The inherent traction of the flake was a perfect choice for cleanability, durability, and safety for this indoor/outdoor oasis at their sunny Port Ludlow home.
For their 525 ft² garage they chose a standard flake blend called "Domino", but decided on going with a smaller 1/8" flake for this application.
Hybrid Flake (Juneau) two car garage floor and stem walls.
"Hybrid" Epoxy Flake blends consist of a variety of different flake sizes, from 1/32"-1", versus a standard flake blend which would consist of a single flake size.
Clear topcoats have a gloss sheen by default, but can be matted for less shine.
This customer chose a flake blend called "Orbit", which perfectly complimented his racing sponsor's colors.
The stem walls were also coated in flake to tie everything together.
Boat garage coated with Hybrid Flake (Mudstone). The texture of the epoxy flake, combined with the already substantial traction of epoxy creates a very safe, waterproof surface for this type of application.
Many times, there are cracks in cement slabs. Sometimes, even when they don't show on the surface, they will appear as the top layer of cement is ground off before application. In either case, we include basic (non-extensive) crack filling/repair with our service, at no extra cost.
The "Mudstone" blend has a very natural look to it, which compliments the wood perfectly. The customers made a great selection!
This is a great example of the most basic covering we offer. We call this a "clean" floor, which is actually very fitting, as it's not just a tidy looking floor, all of our coatings provide an extremely hygienic, stain resistant, easy to clean, anti-microbial finish.
This application has an additive that creates a matted sheen as well as providing extra traction.
The epoxy coating is stopped at the point where the inside of the garage door meets the slab.
This floor was covered in "Wombat" flake, one of the most popular blends - for good reason, it looks great!
We can apply flake to both horizontal and vertical surfaces, which gives us the ability to cover concrete stairs also. What a great look!
Overall, a very simple, clean, strong floor that will stand the test of time (and abuse).
This workshop floor was coated in a medium gray vapor reduction membrane basecoat, with a light distribution of Stargazer flakes, topped with a UV, impact/abrasion, and chemical resistant Hybrid hi-performance Polyaspartic coating.